Bladez-fitness Master GS Indoor Cycle User Manual download pdf (Page 22)

CONSOLE OPERATIONS

GENERAL:

is console has an LCD screen which displays; Speed, RPM, Calories, Distance, Time

and Pulse (optional).

POWER ON/OFF

e display will show all data upon pedaling. Once pedaling stops, the LCD will blink,

displaying the latest data before pedaling stopped. e display will turn o once pedaling

has stopped for over 45 seconds.

MILES/KILOMETER SETTINGS

To change Mile/Kilometer setting please follow the steps below:

1. Remove the back of the console

2. Remove the batteries

3. Locate the two small switches in the back of the console

4. When switch “1” is set to the “ON” position, the unit is in miles

5. To change to Kilometers ip the “2” switch to “ON” and the “1” switch is “OFF”

(or opposite to the “1” switch)

6. Replace batteries

7. Replace back of console

DISPLAY DATA

1. SPEED - Located on top of the LCD display. Shows current speed with pointer.

2. TIME - Shows total time of the workout. Range: 00:00~99:59 minutes.

3. RPM - Revolutions Per Minute. Range: 0~140. If RPM exceeds 140, LCD will show

"STOP" as a safety reminder.

4. CALORIES - Shows calories consumed during workout. Range: 000.0~999.9.

5. DISTANCE - Range: 0~999.9; Change increment: 0.1 miles.

6. PULSE - When using a compatible wireless heart rate chest strap, the bottom of the

LCD will show heart rate (chest strap not included). Range: 60~ 240 BPM.

1 2 ... 17 18 19 20 21 22 23 24

No comments

Bladez-fitness Master GS Indoor Cycle User Manual Page 22